UNISA National Diploma: Engineering: Civil Course, Module and Curriculum
Qualification code: | NDECI |
NQF level: | 6 |
Total credits: | 360 |
Rules: Work-integrated learning is a compulsory component towards the completion of this qualification. Students must complete PEC2601 or PEC2602 and PEC301C or PEC3602.Students may do PEC2601and PEC301C sequentially (i.e. PEC301C after PEC2601} or simultaneously by registering for both modules in the same year. A student may only select for PEC2601and PEC301C if s/he has a placement. PEC2602 and PEC3602 are modules which are offered at specific locations which may require the student to relocate for the duration of the project. |
|
This qualification will be presented using both online and distance learning modes. |
Who can register?
Successful applicants and re-registering students must register to study through Unisa in 2016. Applicants can only begin the registration process if they have received an official approval of their application from Unisa. Re-registering students can begin the registration process after receiving their registration details from Unisa. Should you wish to change to an alternative qualification, please apply for the alternative qualification during the next application period.
How to choose your modules
Each Unisa qualification is structured in such a way that you need to pass a certain number of modules within a certain amount of time in order to graduate. You must pass a minimum number of credits / modules annually so that you are able to re-register and continue with your qualification:
- At least 36 NQF credits (3 modules of 12 credits each) in your first year of study;
- At least 48 NQF credits (4 modules of 12 credits each) in your second or further years of study.
You may not register for more than the allowed maximum number of credits / modules per semester:
- At least 60 NQF credits (5 modules of 12 credits each) in a semester;
- At least 120 NQF credits (10 modules of 12 credits each) per year for year modules.
The maximum number of credits do not include supplementary and/or aegrotat examinations from a previous semester. Modules taken for non-degree/non-diploma purposes also count towards the maximum number of credits allowed.
You must take your available time into consideration when choosing your modules, as this will impact your academic performance. You need approximately:
- 6 to 8 hours per week for semester modules;
- 4 to 6 hours per week for year modules.
Click here for more information on managing your studies.
UNISA Extended Science Pathway
Curriculum for this qualification
As you are deciding on the modules you will be registering for, remember to write down the module names and codes so that you have something that you can refer to when completing your registration.
Rules:
Work-integrated learning is a compulsory component towards the completion of this qualification. Students must complete PEC2601 or PEC2602 and PEC301C or PEC3602.Students may do PEC2601and PEC301C sequentially (i.e. PEC301C after PEC2601} or simultaneously by registering for both modules in the same year. A student may only select for PEC2601and PEC301C if s/he has a placement. PEC2602 and PEC3602 are modules which are offered at specific locations which may require the student to relocate for the duration of the project.
First level
Module | Pre-requisite/Co-requisite/Recommendation |
---|---|
Group A. Compulsory | |
AMC1PRA – Applied Mechanics I (Practical) | Co-requisite:PHY1501 |
DRW1501 – Drawing I | |
ENN103F – English for Academic Purposes | |
EUP1501 – Ethical Information and Communication Technologies for Development Solutions | |
MAT1581 – Mathematics I (Engineering) | |
PHY1501 – Elementary Mechanics | Co-requisite:AMC1PRA (only applicable to NDECI), MCA1PRA (only applicable to NDEEN-MEC, NDEID, NDEMC) |
SCV1501 – Surveying |
Second level
Module | Pre-requisite/Co-requisite/Recommendation |
---|---|
Group A. Compulsory | |
CMD1501 – Construction Methods I | |
CMT1501 – Construction Materials I (Theory) | Co-requisite:CMTPRA1 or CMT1PRA |
CMTPRA1 – Construction Materials I (Practical) | Co-requisite:CMT1501 or CMT101C |
DRW2601 – Drawing II | Pre-requisite:DRW1501 or DRW111X |
MAT2691 – Mathematics II (Engineering) | Pre-requisite:MAT1581 |
MCL1501 – Management: Civil I | |
SRC2601 – Surveying: Civil II (Theory) | Pre-requisite:SRV1501or SRV121Q & SRVPRA1 or SRV1PRA Co: SRCPRA2 or SRV2PRA |
SRCPRA2 – Surveying: Civil II (Practical) | Pre-requisite:SRV1501or SRV121Q & SRVPRA1 or SRV1PRA Co-requisite:SRC2601 or SRV211Q |
TST2601 – Theory of Structures II (Theory) | Pre-requisite:PHY1501 & AMC1PRA Co-requisite:TSTPRA2 or TST2PRA |
TSTPRA2 – Theory of Structures II (Practical) | Pre-requisite:PHY1501 & AMC1PRA Co-requisite:TST2601 or TST271Z |
Third level
Module | Pre-requisite/Co-requisite/Recommendation |
---|---|
Group A. Compulsory | |
GTE2601 – Geotechnical Engineering II (Theory) | Co-requisite:GTE2PRA |
GTE2PRA – Geotechnical Engineering II (Practical) | Co-requisite:GTE2601 or GTE281Q |
MCL2601 – Management: Civil II | Pre-requisite:MCL1501 or MCL191S |
RCD3601 – Reinforced Concrete and Masonry Design III (Theory) | Pre-requisite:TST2601 or TST271Z & TSTPRA2 or TST2PRA Co-requisite:RCD3602 or RCD3PJT & SAN2601 or SAN271Z |
RCD3602 – Reinforced Concrete and Masonry Design III (Project) | Pre-requisite:TST2601 or TST271Z & TSTPRA2 or TST2PRA Co-requisite:RCD3601 or RCD301C & SAN2601or SAN271Z |
SAN2601 – Structural Analysis II | Co-requisite:TST2601 or TST271Z & TSTPRA2 or TST2PRA |
TPE2601 – Transportation Engineering II (Theory) | Co-requisite:SRC2601 or SRC211Q & SRCPRA2 or SRC2PRA & TPE2602 or TPE211C |
TPE2602 – Transportation Engineering II (Project) | Co-requisite:SRC2601or SRC211Q & SRCPRA2 or SRC2PRA & TPE2601 or TPE211C |
WEN2601 – Water Engineering II (Theory) | Pre-requisite:PHY1501 & AMC1PRA Co-requisite:WEN2PRA |
WEN2PRA – Water Engineering II (Practical) | Pre-requisite:PHY1501 & AMC1PRA Co-requisite:WEN2601 or WEN221R |
Group B. Choose 1 from the following | |
PEC2601 – Engineering Practice: Civil II (Workplace-Based Learning) | Co-requisite:Option A: AMC1PRA & DRW1501& ENN103F & EUP1501 & MAT1581 & PHY1501& SRV1501& SRVPRA1 & CMD1501& MCL1501 |
PEC2602 – Engineering Practise: Civil II (Project – Based) | Pre-requisite:10 study unites from level 1 and 2. AMC1PRA, DRW1501, ENN103F, EUC1501, EUP1501, MAT1581, PHY15101,SRV1501, SRVPRA1, CMD1501, CMT1501, CMTPRA1, DRW2601, MAT2691, SRC2601, SRCPRA2, TST2601,TSTPRA2, MCL1501 |
Fourth level
Module | Pre-requisite/Co-requisite/Recommendation |
---|---|
Group A. Compulsory | |
DCM3601 – Documentation III (Theory) | Co-requisite:DCM3602 or DCM3PJT |
DCM3602 – Documentation III (Project) | Co-requisite:DCM3601 or DCM371Y |
GTE3601 – Geotechnical Engineering III (Theory) | Pre-requisite:GTE2601 or GTE281Q & GTE2PRA Co-requisite:GTEPRA3 or GTE3PRA |
GTEPRA3 – Geotechnical Engineering III (Practical) | Pre-requisite:GTE2601 or GTE281Q & GTE2PRA Co-requisite:GTE3601 or GTE331Q |
SAN3601 – Structural Analysis III | Pre-requisite:SAN2601 or SAN271Z |
SSD3601 – Structural Steel and Timber Design III (Theory) | Pre-requisite:SAN2601 or SAN271Z Co-requisite:SSD3602 or SSD3PJT |
SSD3602 – Structural Steel and Timber Design III (Project) | Pre-requisite:SAN2601 or SAN271Z Co-requisite:SSD3601 or SSD301C |
TPE3601 – Transportation Engineering III (Theory) | Pre-requisite:TPE2601 or TPE211C & TPE2602 or TPE2PJT Co-requisite:TPE3PRA |
TPE3PRA – Transportation Engineering III (Practical) | Pre-requisite:TPE2601 or TPE211C & TPE2602 or TPE2PJT Co-requisite:TPE3601 or TPE381V |
WEN3601 – Water Engineering III (Theory) | Pre-requisite:WEN2601 or WEN221R & WEN2PRA Co-requisite:WEN3PRA & WEN3PJT |
WEN3PJT – Water Engineering III (Project) | Pre-requisite:WEN2601 or WEN221R & WEN2PRA Co-requisite:WEN3601 or WEN361F |
WEN3PRA – Water Engineering III (Practical) | Pre-requisite:WEN2601 or WEN221R & WEN2PRA Co-requisite:WEN3601 or WEN361F & WEN3PJT |
Group B. Choose 1 from the following | |
PEC301C – Engineering Practice: Civil III (Workplace-Based Learning ) | Co-requisite:Option A: PEC2601 or PEC201C & RCD3601or RCD301C & RCD3602 or RCD3PJT & MCL2601 or MCL221S |
PEC3602 – Engineering Practice: Civil III (Project Based) | Pre-requisite:AMC1PRA, DRW1501, ENN103F, EUC1501, EUP1501, MAT1581, PHY15101,SRV1501, SRVPRA1, CMD1501, CMT1501, CMTPRA1, DRW2601, MAT2691, SRC2601, SRCPRA2, TST2601,TSTPRA2, MCL1501, GTE2601, GTEPRA, MCL2601, SAN2601, TPE2601, WEN2601, WEN2PRA,SAN2601,SSD3601,SSD3602, TPE3601, TPEPRA, WEN3601, WEN3PJT, WEN3PRA and (PEC2601 or PEC2602) |